- Three High Efficiency Buck Converters
- Two LDOs
- Four Configurable GPIOs
- Integrated Load Bypass Switches
- I2C Serial Interface
- Programmable Power up & down
- Minimal External Component
- Lowest Standby Power
The ACT88325 PMIC is an integrated ActivePMU™ power management unit. It is highly flexible and can be reconfigured via I²C for multiple applications without the need for PCB changes. The low external component count and high configurability significantly speeds time to market. Examples of configurable options include output voltage, startup time, slew rate, system level sequencing, switching frequency, sleep modes, operating modes etc. The core of the device includes 3 DC/DC step down converters using integrated power FETs, and 2 low-dropout regulators (LDOs). Each regulator can be configured for a wide range of output voltages through the I²C interface. ACT88325 is programmed at the factory with a default configuration. The default settings can be optimized for a specific design through the I²C interface. Contact the factory for specific default configurations. The ACT88325 includes features that allow flexibility for all system level configurations. The buck converter and LDO can be reconfigured as a bypass switch. It also contains a high power load switch controller. It’s external power supply enable and power good interface allows seamless sequencing with external power supplies.
The ACT88325 PMIC is available in a 2.8 x 3 mm 36 ball WLCSP package with optimized pinout for easy PCB routing. The pinout allows to implement PTH (Plated-Through Hole) under the package to enable optimize layout efficiency and reduce the required PCB layers for routing.
Advantages of our Modular Power PMU
|Space Saving||With fully integrated power stages with high switching frequency
of 2.25MHz (1.125Mhz) to reduce external component size
|Integrated sequencing||Easy system level design with programmable Reset and Power
Good functions allows for flexible sequencing options
|Seamless sequencing||With external supplies via integrated GPIOs and Power Good signals|
|Highly configurable||Via a I2C uP interface for status reporting and controlling|
- Solid-State Drives
- Microcontroller Applications
- Personal Navigation Devices
The Evaluation Tool Users Guide describes the characteristics and operation of the Active Semi ACT88325EVK1-101 evaluation kit (EVK).
It provides setup and operation instructions, schematic, layout, BOM, and test data.
This EVK demonstrates the ACT88325QI-101 ActivePMU power management IC.
ACT88325 EVK1-101 GUI The Graphical User Interface (GUI) is packaged in a ZIP file that includes the software and all necessary drivers to communicate with the ACT88325EVK1 Evaluation Tool, as well as all descriptions how to use the tool.
ACT88325 GUI Rev x.x.exe
ACT88325 GUI User Guide Rev x.x.pdf
Active Semi GUI and Dongle Driver Installation.pdf